一、產品簡介
該產品為常州東曦自動化科技有限公司為適應市場需求而研發生產的定制產品。主要目的是為了解決當前中小型制備自動化程度不高的問題，實現完全自動化操作，從而節省人力物力，向工業4.0邁進。主要適用于DAC200及以下色譜柱。
前期本公司已經對多家客戶的相關產品進行了升級改造，并保持了良好的溝通，積累了一定的實際生產經驗，為本產品的設計制造奠定了基礎。在設備運行過程中，客戶在肯定設備功能的基礎上，提出了諸多改進意見，本公司根據客戶建議對設備進行優化設計，以滿足客戶工廠批量生產的要求。
二、系統組成
1、PLC控制系統及軟件
（1）能控制多臺泵進行梯度洗脫（即泵能以任意流速任意比例運行，例如A泵從0%至100%同時B泵從100%至0%，但是總值為100%；或者A泵從17%至88%同時B泵從83%至12%，流速總和為設定流速之內任意數值），也可單獨控制每臺泵。
（2）根據預先設計好的工作模式進行自動進樣、洗脫、收集工作，并可無限循環運行。
（3）控制進樣泵精準進樣。
（4）控制閥門進行工作模式切換及收集。
（5）控制檢測器進行信號收集及反饋，實現可根據時間及峰高進行自動切換收集。
2 溶劑泵。根據客戶實際需求選擇1臺或者多臺泵。
3 進樣泵。根據客戶實際需求選擇，數量1臺，用于進樣。
4 檢測器。根據客戶實際需求選擇。
5 收集系統。根據客戶實際需求選擇。與液體接觸部分材質為316L、PTFE、POM或者PEEK。
6 工作模式切換閥。根據客戶實際需求選擇。與液體接觸部分材質為316L，PTFE、POM或者PEEK。
7 裝柱專用手動閥。兩位三通球閥3個，通徑4mm，耐壓10Mpa。與液體接觸部分材質為316L，PTFE、POM或者PEEK。
8 在線過濾器。安裝在進色譜柱之前。可以選裝1個或者多個。
9 框架及管路?？蚣転殇X型材拼接或者304焊接組裝框架。管路為無縫鋼管，材質均為316L。
1. Product introduction
This product is a customized product developed and produced by Changzhou Dongxi Automation Technology Co., Ltd. to meet market demand. The main purpose is to solve the current problem of low degree of automation in small and medium-sized preparations, and to achieve fully automated operation, so as to save manpower and material resources and move towards Industry 4.0. It is mainly suitable for DAC200 and below columns.
In the early stage, the company has upgraded the related products of many customers, maintained good communication, accumulated certain practical production experience, and laid the foundation for the design and manufacture of this product. In the process of equipment operation, the customer on the basis of affirming the function of the equipment, put forward a lot of improvement suggestions, the company according to the customer's suggestions to optimize the design of the equipment to meet the requirements of the customer's factory mass production.
Second, the system composition
1. PLC control system and software
(1) It can control multiple pumps for gradient elution (that is, the pump can operate at any flow rate in any proportion, for example, pump A from 0% to 100% and pump B from 100% to 0%, but the total value is 100%; or pump A from 17% to 88% and pump B from 83% to 12%, the sum of the flow rates is any value within the set flow rate), and each pump can also be controlled separately.
(2) Automatic sampling, elution and collection are carried out according to the pre-designed working mode, and can be operated in infinite cycles.
(3) Control the injection pump to inject accurately.
(4) Control the valve to switch and collect the working mode.
(5) Control the detector for signal collection and feedback, and realize automatic switching and collection according to time and peak height.
2 Solvent pumps. Choose one or more pumps according to the actual needs of customers.
3 Injection pumps. According to the actual needs of customers, the quantity is 1 set, which is used for injection.
4 Detectors. Choose according to the actual needs of customers.
5 Collection system. Choose according to the actual needs of customers. The parts that come into contact with the liquid are made of 316L, PTFE, POM or PEEK.
6. Working mode switching valve. Choose according to the actual needs of customers. The material for contact with liquids is 316L, PTFE, POM or PEEK.
7. Special manual valve for column installation. There are 3 two-position three-way ball valves, with a diameter of 4mm and a pressure resistance of 10Mpa. The material for contact with liquids is 316L, PTFE, POM or PEEK.
8 Online filters. Installed before the incoming column. One or more can be optionally installed.
9 Frame and tubing. The frame is aluminum profile splicing or 304 welded assembly frame. The pipes are seamless steel pipes, and the materials are all 316L.
2006-2024 上海博華國際展覽有限公司版權所有（保留一切權利）
滬ICP備05034851號-57
